|
View unanswered posts | View active topics
Author |
Message |
Lonman
|
Posted: Mon Jan 08, 2007 5:07 am |
|
Joined: Mon Dec 10, 2001 3:57 pm Posts: 22978 Songs: 35 Images: 3 Location: Tacoma, WA Been Liked: 2126 times
|
Bigdog @ Sun Jan 07, 2007 1:07 pm wrote: I fear no system. Bring it on.
Where you at? Kind of hard to "bring it on" when you are afraid to list your locations.
_________________ LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!
|
|
Top |
|
|
Lonman
|
Posted: Mon Jan 08, 2007 5:23 am |
|
Joined: Mon Dec 10, 2001 3:57 pm Posts: 22978 Songs: 35 Images: 3 Location: Tacoma, WA Been Liked: 2126 times
|
JDrifter @ Sun Jan 07, 2007 1:36 pm wrote: Did you just say "Bring it on!"? I'm bringing this system with me, BD.
Just make sure you have enough tissue paper to wipe tears from your eyes as you listen to a tri-amped TRX system.
Where shall I park my trailer?
Nah you don't need to bring anything like that, if he would be game (which of course he wouldn't ), just bring in the proper power 1 extra amp for the subs would do it, & crossover connected to his own system & then eq the room - difference between his non-provable theory & tried & true facts would be difference between night & day!
_________________ LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!
|
|
Top |
|
|
Guest
|
Posted: Mon Jan 08, 2007 7:55 pm |
|
|
The world is full of skeptics and non believers.
|
|
Top |
|
|
JDrifter
|
Posted: Sun Jan 14, 2007 9:14 pm |
|
|
Senior Poster |
|
Joined: Sun Jul 04, 2004 7:52 am Posts: 205 Been Liked: 0 time
|
I don't mean to hijack this thread, but I have some questions about EQ settings.
What is the recommended channel EQ setting for mic input? Do you boost the mid?
And... what is the correct channel EQ setting for acoustic guitar with Fishman pickup?
Peace to everyone...
|
|
Top |
|
|
Meep70
|
Posted: Sun Jan 14, 2007 11:07 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
JDrifter @ 14/1/2007, 11:14 pm wrote: I don't mean to hijack this thread, but I have some questions about EQ settings.
What is the recommended channel EQ setting for mic input? Do you boost the mid?
And... what is the correct channel EQ setting for acoustic guitar with Fishman pickup?
Peace to everyone...
There is not really a recommended magical setting that just works for every microphone. There are too many variables that have to be taken into account, such as the mic itself, the spakers, the room, the crowd, the style of music, system EQ, etc.
My rules of thumb for working with EQ settings:
1. Start with all settings in the middle.
2. Us EQ sparingly
3. Tame the peaks first by turning various bands down.
4. Only after you have lowered frequencies that are too loud, boost those that are too quiet.
|
|
Top |
|
|
Guest
|
Posted: Mon Jan 15, 2007 2:07 am |
|
|
Although some will disagree, I EQ to achieve the sound I want to here from certain pieces of equipment. My microphones are Eqed to the sound I want to here from them and my machines are EQed to the sounds I want to hear from them.
Since every piece of equipment has a different natural EQ, you will have to listen and make the adjustments to your ear.
|
|
Top |
|
|
twansenne
|
Posted: Mon Jan 15, 2007 8:27 am |
|
Joined: Fri Jan 13, 2006 4:03 pm Posts: 1921 Images: 1 Location: N. Central Iowa Been Liked: 53 times
|
BD, are you saying that a room has no effect on sound fom a PA system, so why do you even have an EQ? (OOPS forgot you use t for a preamp)
You say it is to adjust each peice of equipment, but that can be done with the channel EQs (twistys), and therfor a seprate EQ is unnecessary, by your standards. Even if you used a sepertat eq to adjust for each peice of equipment, you would need several EQs or one adjustment on the EQ would change the sound of all devices.
|
|
Top |
|
|
jamkaraoke
|
Posted: Mon Jan 15, 2007 10:30 am |
|
Joined: Thu Dec 26, 2002 10:54 am Posts: 3485 Location: New Jersey , USA Been Liked: 0 time
|
It is true that you EQ your system to achieve a "sound" that you want .
A sound that sounds Crisp , Clear and Powerful. Many variables go into producing that "certain sound"
Your Microphone , Your Amplifier, Your Mixer, Your Speakers !
It is probably true that if all settings remained the same your system would produce the same sound over and over again.
But there is no denying that the ACOUSTICAL make up of the room would make your ear HEAR a different sound in every different room.
|
|
Top |
|
|
Meep70
|
Posted: Mon Jan 15, 2007 12:52 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
Big Dog, Rest assured that while I admire your staunch adherence to what works for you, I must agree with the others that I think you are pompous, overbearing and obnoxiously ingrained in your opinion on the methods which you use for EQ.
That said, I am glad that what you are doing works well, for you, but as for myself, I will stick to the laws of physics and acoustics and custom EQ my system for each venue in which I play, as do most professionals.
As for you others? Why engage in the art of necrohippoflaggellation. We all KNOW he is right, in his own mind, whether he is in his right mind, however will remain a question to be pondered.
|
|
Top |
|
|
twansenne
|
Posted: Mon Jan 15, 2007 1:03 pm |
|
Joined: Fri Jan 13, 2006 4:03 pm Posts: 1921 Images: 1 Location: N. Central Iowa Been Liked: 53 times
|
Meep70 @ Mon Jan 15, 2007 2:52 pm wrote: As for you others? Why engage in the art of necrohippoflaggellation. We all KNOW he is right, in his own mind, whether he is in his right mind, however will remain a question to be pondered.
Casue I need to build up my post count!!!!! LOL LOL LOL
|
|
Top |
|
|
Meep70
|
Posted: Mon Jan 15, 2007 1:10 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
twansenne @ 15/1/2007, 3:03 pm wrote: Casue I need to build up my post count!!!!! LOL LOL LOL
Point taken... Carry on!
|
|
Top |
|
|
Guest
|
Posted: Mon Jan 15, 2007 1:51 pm |
|
|
You all agree that every piece of equipment has it's own natural EQ? (Resonance, voice, acoustic response)
I Have used the Twisties to adjust the individual channel EQ settings and I have a master 32 band EQ adjusted for the entire system.
Now I want you all to listen to what you keep repeating.
You are telling me that every room makes a difference in the sound. WHY? And exactly What sounds different?
There is only one thing that sounds different. It's what you hear, the music. So when you all "EQ" the room, what are you changing and why? You are changing the way the music sounds. How? With the EQ settings. WHY? Because all the songs sound too bassy or too tinny, right?
After listening to thousands of songs, I have set my EQ settings to where 99% of the songs sound right in every room. So if they all sound good (not too bassy or too tinny) from room to room, why do I have to change anything? I don't care if you don't believe me. I have done it and it works.
You have to keep changing your EQ settings, because your system does not sound good. :shock: Right?
So tell me who has a better sounding system?
You have to keep making changes to the way your system sounds all night long, night after night?
That makes me nuts????? :whistle: LMAO
Mine sounds good night after night and room after room. Set it and forget it. :O
|
|
Top |
|
|
Lonman
|
Posted: Mon Jan 15, 2007 2:16 pm |
|
Joined: Mon Dec 10, 2001 3:57 pm Posts: 22978 Songs: 35 Images: 3 Location: Tacoma, WA Been Liked: 2126 times
|
Bigdog @ Mon Jan 15, 2007 1:51 pm wrote: You are telling me that every room makes a difference in the sound. WHY? And exactly What sounds different? Becuase of ROOM ACOUSTICS!!!! This is a fact, something your mind can't seem to grasp. EVERYTHING in a room affects the sound. An empty room is going to sound completely different than a room full of furnature, or people. Materials a room is built from are going to alter sound, a completely cemented room is going to have different tonal qualities than a completely wooden room- wood will absorb more sound than cement. A glass room will sound different than either. Curtains covering a glass window will sound different than a glass window without a curtain. Ceiling placements play a factor, ceiling heights that is, & the material that a ceiling is made of. Carpeted or not will play a factor. ALL of these things put together WILL alter the overall sound in a room. What works in that completely empty cement room, will NOT sound the same in that wooden, carpeted, low ceiling room full of people, it will sound completely different which is why you eq for the room. Quote: There is only one thing that sounds different. It's what you hear, the music. So when you all "EQ" the room, what are you changing and why? You are changing the way the music sounds. How? With the EQ settings. WHY? Because all the songs sound too bassy or too tinny, right? Yes that is right, but a song that may sound too bassy or tinny in one room, may sound perfectly fine in another, I know YOU have never experienced this, but 99.9% of everyone else has. But also as people fill up a room, acoustics are going to change once again, which means some slight eq adjustments. Quote: After listening to thousands of songs, I have set my EQ settings to where 99% of the songs sound right in every room. So if they all sound good (not too bassy or too tinny) from room to room, why do I have to change anything? I don't care if you don't believe me. I have done it and it works. No I do not believe you one bit. It's impossible. I can see you setting the 32 band up once per night & adjusting the channel eq's (twistys) per song, but you claim you don't even do that. I haven't found a night yet where 1 setting would work for every song - I have settings that are close, but most will need some sort of adjustment, even if it's a slight tweak. Quote: You have to keep changing your EQ settings, because your system does not sound good. :shock: Right?
Actually my system sounds pretty good without any main eq'ing, I eq out bad frequencies, which as you have pointed out from my previously posted pic that it is ALMOST flatlined which means there is not much eq'ing for that room that is needed, except for a couple problem frequencies that any room can get.
This topic is going nowhere. I think we may wrap this one up pretty soon!
_________________ LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!
|
|
Top |
|
|
Meep70
|
Posted: Mon Jan 15, 2007 2:46 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
Bogdog! What part of necrohippoflaggellation (beating a dead horse, if I must translate for you) don't you understand?
Bigdog @ 15/1/2007, 3:51 pm wrote: ...You are telling me that every room makes a difference in the sound. WHY? And exactly What sounds different? I refuse to rehash what other, experienced professionals have already explained. Accept that you dont' get it (or attend some classes for audio production at your local artsy fartsy college), and lets move on to another dead horse to beat. This one is starting to have a rank odor about it. Quote: There is only one thing that sounds different. It's what you hear, the music. So when you all "EQ" the room, what are you changing and why? You are changing the way the music sounds. How? With the EQ settings. WHY? Because all the songs sound too bassy or too tinny, right? *rolls eyes* It goes deeeper than just the way the music sounds, and is often MUCH more subtle than bassy vs. tinny. Quote: After listening to thousands of songs, I have set my EQ settings to where 99% of the songs sound right in every room. So if they all sound good (not too bassy or too tinny) from room to room, why do I have to change anything? I don't care if you don't believe me. I have done it and it works. Goody for you! Thanks for sharing this, but haven't you already said it numerous times? Quote: You have to keep changing your EQ settings, because your system does not sound good. :shock: Right? WRONG. Even with all EQ set in the middle or bypassed, my system sounds VERY good in any room I set it up in (better than most, I assure you). The thing is that I resuse to settle for very good sound, when I can have better. There is no compromise and no such thing as a universal setting that gives me the perfection I seek every time I set up somewhere. It is great that you have found a compromise that is acceptable to you. I refuse do that, though, and others here, apparently agree with me. Quote: So tell me who has a better sounding system? I venture to say that those of us who are a bit more meticulous will have more accurate and pleasing sound. Quote: You have to keep making changes to the way your system sounds all night long, night after night? Actually, only minor changes after a sound check at the beginning of a gig, and those are almost automatic and second nature. You make it sound like twisting a knob or moving a slider occasionally is a chore. Are you THAT out of shape? Quote: That makes me nuts????? :whistle: LMAO I refuse to speculate as to your sanity (or lack thereof) or any potential causes of such mental afflictions. Quote: Mine sounds good night after night and room after room. Set it and forget it. :O As I said above, for some of us, good (or even very good) isn't good enough. Set it and forget it? Maybe I take that approach with my alarm clock, but for a public performance, I demand better for my customers, whrgther they are karaoke singers, or local bands.
Now. Can we move and and agree that you are right? Your stuff DOES sound good--to you and your customers. However, there are those of us who demand better than a compromising "good", and we will still tweak all night, if the room requires it, so that we can sell an excellent show rather than settling good.
*steps of of his soapox*
|
|
Top |
|
|
timberlea
|
Posted: Mon Jan 15, 2007 4:47 pm |
|
Joined: Wed Sep 04, 2002 12:41 pm Posts: 4094 Location: Dartmouth, Nova Scotia, Canada Been Liked: 309 times
|
Hey everyone BD is right. The room has nothing to do with sound. I mean whether I go in a house that is full of furniture or the same house is empty and I talk, it all sounds the same. So the room has nothing to do with sound.
_________________ You can be strange but not a stranger
|
|
Top |
|
|
timberlea
|
Posted: Mon Jan 15, 2007 4:50 pm |
|
Joined: Wed Sep 04, 2002 12:41 pm Posts: 4094 Location: Dartmouth, Nova Scotia, Canada Been Liked: 309 times
|
I hope everyone caught the sarcasm in my post. I know BD will not be able to figure it out. Of course he doesn't realize that when he is adjusting those little "twisties" that he is in reality adjusting the eq. You know the highs, the mids, and the lows.
_________________ You can be strange but not a stranger
|
|
Top |
|
|
JDrifter
|
Posted: Mon Jan 15, 2007 4:54 pm |
|
|
Senior Poster |
|
Joined: Sun Jul 04, 2004 7:52 am Posts: 205 Been Liked: 0 time
|
Quote: There is not really a recommended magical setting that just works for every microphone. There are too many variables that have to be taken into account, such as the mic itself, the spakers, the room, the crowd, the style of music, system EQ, etc.
My rules of thumb for working with EQ settings:
1. Start with all settings in the middle. 2. Us EQ sparingly 3. Tame the peaks first by turning various bands down. 4. Only after you have lowered frequencies that are too loud, boost those that are too quiet.
I actually meant the EQ setting for the channel, not the entire mix. This would be the twisties marked hi, mid, and low on the channel.
I have my EQ for the entire mix flat, and I adjust it accordingly to taste... A little salt, pepper, here and there and BAM! Ooops... This is a karaoke forum. Sorry...
|
|
Top |
|
|
Meep70
|
Posted: Mon Jan 15, 2007 5:08 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
Quote: ...I adjust it accordingly to taste... A little salt, pepper, here and there and BAM! Ooops... This is a karaoke forum. Sorry...
I add a little cayenne, too, but I am accused of occasionally running my mix a bit hot.
|
|
Top |
|
|
twansenne
|
Posted: Mon Jan 15, 2007 5:13 pm |
|
Joined: Fri Jan 13, 2006 4:03 pm Posts: 1921 Images: 1 Location: N. Central Iowa Been Liked: 53 times
|
Meep70 @ Mon Jan 15, 2007 4:46 pm wrote: Bogdog! What part of necrohippoflaggellation (beating a dead horse, if I must translate for you) don't you understand?
<<<snipped the very good points made to conserve space>>>>
*steps of of his soapox*
Working on your points too???? LOL LOL :hi5:
|
|
Top |
|
|
Meep70
|
Posted: Mon Jan 15, 2007 5:19 pm |
|
Joined: Sun Jun 18, 2006 8:39 am Posts: 180 Location: Euless, TX Been Liked: 0 time
|
twansenne @ 15/1/2007, 7:13 pm wrote: Working on your points too???? LOL LOL :hi5:
Who, me? *innocent grin*
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 668 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|