Karaoke Forums

hello am newbie to hooking up to computer have vocopro da3600 pro mixer amp and soundblaster sound card has the line in  was needing help to hook up dont want to blow anythimg up thks becky

All you need to do to hook up your computer to this Amp/Mixer is a patch cord that has 1/8" Stereo to RCA you can get these at any Radio Shack. All you need to decide is what lenth of cord you have.

You plug the 1/8 Stereo plug into the out on the sound card (usually light green)
If you have Soundblasters PCI card it is the one that has headphone symbol on it. Then connect the other end of the cord to one of your 2 audio "IN" channels on the vocopro unit. These are RCA connections.

_________________
FlipSide Karaoke
Scott

thks alot one more question will i be able to record vocals this way thks again becky

you will need another cord exactly like the one I suggested that will hook to your Record "Out" RCA connections on the vocopro unit. You will connect the 1/8" stereo plug into the sound card input line in jack.

Your will be able to use your soundblaster software to record the mixed music and vocals coming from your vocopro unit. You will need to play with the software at home to get the recording technique down. I have not had great success with recording on creatives software but there are other users on this forum who have and may be able to provide more assistance.

Creative does have a good support tech line that you can call.

_________________
FlipSide Karaoke
Scott