Joined: Thu Jan 05, 2006 4:51 pm
Posts: 1
Been Liked: 0 time
|
|
I have five MICs and a CDG player going into a MACKIE 1402-VLZ mixer.
The TAPE OUT of the MACKIE is connected to the DVD INPUT of aVOCOPRO
DA-3600Pro 200w MIXING AMP.Needing reverb I bought a VOCOPRO VSP-M1
Multi-Effect Processor/Mixer.I would like advise as to the best way to hook the
EFFECTS PROCESSOR to the existing setup.The DJ SET UP from MACKIE shows
a single MONO PLUG from the AUX/OUT of the MACKIE to the EFFECTS PROCESSOR and one single MONO PLUG from the EFFECTS PROCESSOR which splits to two MONO PLUGS and hooks back into the AUX RETURNs of the MACKIE.I am not clear about this setup.Any suggestions or comments?[/b]
|
|
Login
Register
FAQ
Search
