| Karaoke Scene's Karaoke Forums https://mail.karaokescene.net/forums/ |
|
| Karaoke Player to Mixer https://mail.karaokescene.net/forums/viewtopic.php?f=1&t=1309 |
Page 1 of 1 |
| Author: | icenine [ Mon Jan 12, 2004 2:59 pm ] |
| Post subject: | Karaoke Player to Mixer |
I had my karaoke player connected to the mixer via the 'tape input.' I then bought a y-adapter,' stereo to left and right mono, and tried it connected to a line in on the mixer. For some reason I seemed to get more and better sounding output when I used the tape input. Is this what I should be seeing? If so, can I get an explaination from one of you techno-geeks? 
Thanks! Patrick |
|
| Author: | Guest [ Mon Jan 12, 2004 10:47 pm ] |
| Post subject: | |
Pat Because it's not controlled through a gain pot or sweepable channel eq's.. it's coming off the machine direct.. But try to sing off it in a club..  under high power it may feedback. The keyword is MAY.
Depending on the volume and acoustics. |
|
| Author: | icenine [ Fri Jan 16, 2004 5:42 pm ] |
| Post subject: | |
Brian, Actually, I split the left and right channel into 2 separate channels on the board. The reason I wasn't getting as much gain was because I didn't have the trim pots turned up enough. All is now right with the world! 
Thanks! |
|
| Author: | Guest [ Fri Jan 16, 2004 11:13 pm ] |
| Post subject: | |
Pat That works too.. I use my 24 ch rack monitor mixers when I do that.. I have 2 Crest RMX series mixers that rarely see use but that's what they do.. otherwise I use the Stereo channels on my Yahamas.. You don't want the RMX's for karaoke.. $8K for 24 channels in and 6 mono outputs, but a real nice set of 4 way sweeps for tone control.. all rack mountable. mostly a live toy. I have been studying DJ gear again.. thinking about re-stocking on it.. and building 2 more DJ systems. I have the media already.. just possibly getting more gear.. and who can't use more gear?
|
|
| Author: | TTowntenor [ Sat Jan 17, 2004 2:25 am ] |
| Post subject: | |
Crest "RMX" series??? You shure you aren't talking about the XRM series??? Fingers getting tied up, twice??? |
|
| Author: | icenine [ Sat Jan 17, 2004 6:32 am ] |
| Post subject: | |
Brian Douglas wrote: I have been studying DJ gear again.. thinking about re-stocking on it.. and building 2 more DJ systems. I have the media already.. just possibly getting more gear.. and who can't use more gear? I hear you there, Brian! GEAR RULES!
Patrick |
|
| Author: | Guest [ Sat Jan 17, 2004 9:51 am ] |
| Post subject: | |
For about the first 6 months of design they called the RMX-24.. and released it as an "XRM-24" the "second generation" is called the XR-24 -- t-town if you wanna be specific yes it's an "xrm" series console.. Sorry to create any confusion.. when you post after shows things tend to be "a little bit fuzzy"  
|
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|