| Karaoke Scene's Karaoke Forums https://mail.karaokescene.net/forums/ |
|
| X-stand to hold small rack with mixer on top? https://mail.karaokescene.net/forums/viewtopic.php?f=1&t=11129 |
Page 1 of 1 |
| Author: | mckyj57 [ Sun Oct 14, 2007 4:58 pm ] |
| Post subject: | X-stand to hold small rack with mixer on top? |
I don't know if this is technical or not, but it is close enough. I have a four-space SKB rack that holds my medium gig setup. A powered mixer (PMH3000) sits on top of it nicely, and the four slots hold a monitor power amp, a dual 15-band monitor EQ, a power strip with light, and Lexicon MX200 for effects. All this works great. But I have to have a table to sit it on, and that isn't always easy to find in the right measure. Has anyone ever used an X stand, i.e. a keyboard holder, to hold a rack? |
|
| Author: | DannyG2006 [ Sun Oct 14, 2007 5:12 pm ] |
| Post subject: | Re: X-stand to hold small rack with mixer on top? |
had a friend that once used the type of stand that caterers use to place their trays on to hold his rack whichwas at least an 8 space with mixer, amplifier cd player and cdg player. worked ok, might even thnk of getting two for me, one for the rack and tone for the singer's screen. |
|
| Author: | JDrifter [ Sun Oct 14, 2007 8:05 pm ] |
| Post subject: | Re: X-stand to hold small rack with mixer on top? |
How about this one? Keyboard Stand. Made by Adam. (MC.AKS-1175) This flat-top keyboard stand provides the ultimate in stability for even the heaviest keyboards! This collapsible and adjustable stand is made to take the abuse of the road and the weight of a heavy mixer or keyboard. Designed to use while standing or sitting, the stand is adjustable in both height and width to best fit your specific needs! With its flat surface and sturdy construction, your mixer or keyboard is easily accessed from all sides. Handy while plugging in all those patch cables and microphone cords. Built to meet the standards of any gigging musician, this foldable stand is exactly what you need to hold your expensive electronic equipment! Dimensions: W=28 3/4" D= 12 5/8" MAX HGT 44" |
|
| Author: | Flipper [ Sun Oct 14, 2007 8:33 pm ] |
| Post subject: | Re: X-stand to hold small rack with mixer on top? |
I have used the "Z" Stand with great results. It is very stable and has plenty of height and width adjustment. It works great for racks! Everything folds down for transporting and takes up little storage space. http://www.sweetwater.com/store/detail/ZStd/ |
|
| Author: | mckyj57 [ Sun Oct 14, 2007 9:01 pm ] |
| Post subject: | Re: X-stand to hold small rack with mixer on top? |
JDrifter @ Sun Oct 14, 2007 11:05 pm wrote: How about this one?
Keyboard Stand. Made by Adam. (MC.AKS-1175) This flat-top keyboard stand provides the ultimate in stability for even the heaviest keyboards! Thanks, I missed those references to a mixer. That looks like just the ticket.... |
|
| Author: | mckyj57 [ Sun Oct 14, 2007 9:02 pm ] |
| Post subject: | Re: X-stand to hold small rack with mixer on top? |
Flipper @ Sun Oct 14, 2007 11:33 pm wrote: I have used the "Z" Stand with great results. It is very stable and has plenty of height and width adjustment. It works great for racks! Everything folds down for transporting and takes up little storage space.
http://www.sweetwater.com/store/detail/ZStd/ That looks like a winner as well! Looks like my thought wasn't quite so crazy after all. Thank you! |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|