Karaoke Forums

If it's a powered sub, you would hook it up into the Pre out.  If you are only using 1 powered sub that doesn't accept a stereo input, then you will only be able to plug into either the left or right which will only be sending 1/2 the main signal.   You also need to make sure the sub has it's own crossover, otherwise it won't be of much use as a sub.

_________________
LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!

clsunli,

I checked out the users' manual for you unit and the amps are not bridgable. You can still get the main mix through your monitor by switching to Main/Main mode instead of Main/Monitor mode (far right side of the unit, about half way up), but you are going to be dedicating more power to the monitor (210 watts) than the cabs (150 watts each). Again, you may not really hear the differance, so you may want to try it this way. The speaker hookup would be the same as you were doing it before, just switching it to Main/Main mode would bypass the monitor bus and send the same main mix to all 3 speakers.

Try that out and see if that's what you need!!

_________________
C Mc
KJ, FL