Karaoke Forums

Can anyone provide lyric wiping tips for super fast Karaoke songs? I am trying to create "Ill Mind Of Hopsin 5" using Karaoke Builder Studio with little luck. I can time the track out perfectly when it plays on the in-program screen, but he CDG can't keep up with the wiping when produced. Have had this problem with other fast songs too. Any suggestions would be appreciated. Thanks!

Most likely it's the font type/size possibly how many lines per page, line by line wipes as opposed to clear screen paging you are using. Some fonts take longer to render on the screen.

_________________
LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!

This post was posted twice, so the answer is below. After listening to that song, I would highly suggest you use no outline and set the highlight quality to "FAST WIPING". Word for word is not a great idea as it makes the words jerk into place.

Please, Read the next post I made and it will tell you what you need to do in order to make your rap song appear properly.

Hi, the problem is most likely you are using outline around your song? In the right hand corner you will see (Wipe type: Set to txt) Below that you will see boxes marked outline (left, right, top, bottom). Set these values from 2 to all 0's.

Some people make the mistake of making a track and coloring the outline setting to the screen color. This does not eliminate the outline drawing from being done, you need to tell it physically to not draw the additional pixels and binary codes.

I am new here, so I will need to see if I can upload a picture. You can use their demo song "Devil Went Down To Georgia" and look at the settings. They removed the actual outline draw which is located above the shadow areas. When making fast tunes, these should be set to all 0's.

Binary in their program only draws so fast. I have a program that is way more complex over KBStudio or even MTU's Workstation. I have not done any author work in a long time, but can do rap and keep the outline. This works on a VERY old platform though that was out way before MTU's Workstation. Try what I have suggested and let me know